Features
HF054 drilling machine is a specially designed product based on the original mature model, aiming at the special working condition of using water dust removal and 90-200mm aperture.
(1).Integral feed The integrated feed is easy to install a wet type dust removal device, and the dust-catching cylinder is built-in, which is not easy to be damaged, and the inner buckle angle is larger. Equipped with dust cover which controlled by a cylinder to slide up and down, which will be obviously avoid the problem of gravel and mud are blown to chain, sprocket and control panel.
(2).Rotation unit Double-sealed type of the rear air feed system, brings double protection to cabinet as air and water can not reach inside. After the water seal is damaged, the air is blown out from the rear end of the tank, so air and water do not enter the inside of the tank. At the same time, no need to open the tank while replacing the water seal, oil seal also need to be replaced, thus air and water will not pollute the entire hydraulic syster.
(3).Undercarriage Strang power hydraulic motor with good grade ability, it is flexible and easy to pull an air compressor for work. The track floats up and down within 15" and is suitable for rough terrain operations. Longer frame increases stabil ity of the rig.
(4). LED light with characteristics of low wattage, low heat, high brightness and durable.
(5).Heated water tank The enaine exhaust heats the water tank so that the -water does not freeze, ensuring the normal use ofwet type dust removal in cold regions of-minus 30 degrees. It's not only saves the cost of refrigerating liquid, but also avoids the problem that the use of the refrigerating liquid affects the service fife of rotation unit and hammer. The cost of use is greatly reduced.
Technical Data
Drilling diameter
| follow-pipe :Ф114-Ф219mm |
Down-hole :Ф105-Ф200mm | |
Drilling depth | follow-pipe :40m |
Down-hole :200m | |
Working air pressure | 1.2-2.4Mpa |
Air consumption | 11 -25mm³/min |
The biggest pipe-rod changing length | 3m |
Propulsion power | 6000kgf |
Moving speed | 2km/h |
Gradeability | 24° |
Power | internal combustion 70kw |
Electric 30kw | |
Outer size(L*W*H) | (transportation state)6900*2200*2200 |
Weight | 6200kg |
Dust removol | Wet type(optional) |
Company IntroductionHanfa Group established in 1998 is a key enterprise in the industry of geological exploration and water well field, with the ability to research,manufacture and market. Now, the Group pursues high standard manufacturing and qualified products. It has more than 20 species such as water well drilling rig, core drilling rig, engineering drilling rig, DTH drilling rig, horizontaldirectional drilling rig, etc. These machines are mainly used in geological prospecting, exploration of railway and highway engineering, mining, SPT, water well, geothermal well etc. Some of them won the Scientific and Technical Advance Prize or the National Scientific Research Achievement Prize. All the products have passed the quality system certification of ISO9001:2000 and are national inspection-free products.
1. More than 30 years of experience
you need it, we will arrange a pick-up.
2.Top production team
The transportation and packaging will be packaged in international standards. If you have special packaging requirements, we will give you the most suitable solution.
3.Our Service
- New machine provides technical trair.
- Once anything goes wrong with the machine by normal using, our technical person must appear at the first time no matter where you are.
- When the machine should be maintained, you will receive the reminding from us.
- According to different geological conditions, we will recommend different construction plans for you
- Remind you which are wearing parts, so you can prepare enough.
- 24 hours respond to your quality problem.
FAQ
1,Are you trading company or manufacturer?
2,Are your products qualified?
Yes, our products all have gained ISO certificate,and we have specialized quality inspection department for checking every machine before leaving our factory.
3,How about your machine quality?
All of our machines hold the ISO, QC and TUV certificate, and each set of machine must pass a great number of strict testing in order to offer the best quality to our customers.
4,Do you have after service?
Yes, we have special service team which will offer you professional guidance. If you need, we can send our engineer to your worksite and provid the training for your staff.
5,What about the qaulity warranty?
We offer one-year quality warranty for machines' main body.
6,How long can you deliver the machine?
Generally, we can deliver the machine in 7 days.
